What Growers Should Know About Corn and Soybean Seed Treatments

Table of Contents:

Seed treatments may not be the first thing that comes to mind when growers think about return on investment (ROI). The primary decisions get most of the attention: which seed to plant, and how each variety or hybrid might affect yield relative to its price. Seed treatments belong in that conversation too, because they protect the genetic potential a grower has already paid for.

This post is part of an ongoing series on ROI for growers.

How Seed Treatments Have Evolved

Fungicides have been applied to seed since the 1960s and even before. Early treatments often relied on a single active ingredient. Today, the number and complexity of active ingredients on a seed is far greater, especially in corn and increasingly in soybeans. The diversity of active ingredients now rivals the diversity of herbicides in weed control programs.

Many growers assume their corn seed treatment is dialed in because they bought the seed and took what came with it. Meanwhile, the value of each kernel has changed dramatically. As transgenes were added, a bag of seed that once cost $60 or $70 per unit rose to perhaps five to six times that today, depending on the crop. When each seed is worth that much more, protecting it matters more too. That explains why corn seed now carries more combinations of fungicides, insecticides, and nematicides than it once did.

Contact and Systemic Protection

Seed treatment fungicides come in two broad types: contact and systemic. A combination of both is a good thing to have.

Most people picture pathogens moving from the soil and environment toward the seed. Seed production fields are not sealed from pathogens, though, so seed itself can carry them. A contact fungicide on the seed helps protect against seed borne disease. A systemic fungicide helps protect against soil borne disease as the seed germinates and the seedling develops. Together, they help keep the seed as clean as possible at planting and protect it afterward.

Reading the Numbers on Corn Seed Treatments

Growers often see numbers like 250, 500, or 1250 on corn seed. These refer to the amount of insecticide active ingredient on each seed: 250 means 0.25 milligrams per seed, 500 means 0.5 milligrams (twice as much), and 1250 means 1.25 milligrams. The shorthand saves everyone from talking in milligrams.

Higher rates can provide longer protection at a critical stage and can cover additional soil pests. On the fungicide side, the fewest fungicides on any leading brand is believed to be three, usually alongside at least one and sometimes two insecticides. Every brand puts a cocktail of active ingredients on the seed, and the variety across brands is great.

When Higher Insecticide Rates Fit

The highest rates, such as 1250 rates, are specialized for specific insect pests. They make sense in fields with high wireworm pressure, such as a former forage field or a heavily manured field where wireworm is a concern.

They also come up with corn rootworm. Many Cry protein stacks are not working quite as well as they did 10 or 15 years ago. Pairing an insecticide with the mode of action from Cry or RNAi proteins is a belt and suspenders approach. It helps eliminate individual insects and reduce feeding so the corn stands and performs well.

Protecting Genetic Potential

Choosing hybrids and varieties by soil type, field, and farm is one of the most time consuming and emotional decisions a grower and their seed representative make. Seed treatments protect that genetic potential no matter what the environment turns out to be, and no one knows the environment in advance. Where risks can be anticipated, such as head smut susceptibility in certain varieties and geographies, companies like Rob-See-Co apply specific fungicides to address them.

Looking Beyond Emergence

Getting plants out of the ground is an incomplete measure of seed treatment success. Plant population means less and less. The goal is thrifty, robust, uniform plants, where neighboring plants look much the same and no runts go down the row.

Pythium shows why. It can reduce stand, and even when it does not, it can produce weaker plants that stay several days behind. Those plants contribute much less to yield than strong, healthy neighbors. Emergence studies that flag plants emerging one, two, and three days after the first plants can measure this impact, in hundreds of kernels lost.

Pythium and Fusarium Protection

Almost every commercial seed corn brand now uses at least two modes of action against Pythium, which has been a big improvement over the last ten years. As protection against Pythium has improved, Fusarium has increasingly become the disease most likely to limit a given year. Seed companies once asked about new Pythium modes of action, and today the conversation focuses more on Fusarium protection.

None of these diseases is eliminated, but each can be reduced so it is less likely to hold back a given genetic package in a given year. Adding a third mode of action for Fusarium has shown reductions in seedling blight, crown rot, and some stalk rot, as well as SDS in soybeans.

Soybean Seed Treatments Vary Widely

Growers often decide between treating and not treating soybean seed, and many do not know what is in the treatment. Because treatments are often similar in color and appearance, they can seem interchangeable. In reality they differ a great deal. A comprehensive soybean seed treatment brings multiple modes of action against Pythium, Phytophthora, Fusarium, and Rhizoctonia.

Soybeans are somewhat more forgiving than corn when some stand is lost. Corn focuses on a single ear per plant, while soybeans have more fruiting positions. Two trends of the last 10 to 15 years narrow that margin:

  • Earlier planting. Soybeans are now often planted before corn, which was not the norm ten years ago.

  • Lower seeding rates. Rates have dropped significantly.

Together, these trends put growers in a corner, and the ROI on seed treatment has increased rapidly over the last ten years. Insecticides now go out on more acres than they did five or ten years ago, in combination with a fungicide package. Uniform emergence also matters in soybeans for maximizing genetic potential. Any decision that changes the system, such as moving a planting date, deserves a look at what else should change to optimize performance.

Nematodes and Sudden Death Syndrome

Growers have relied on native soybean traits to control nematodes since the 1970s. Researchers at Iowa State and elsewhere find those traits are losing effectiveness, and in many cases the long-used genetic resistance source is only about half as effective as it once was because resistance has built up. Sudden death syndrome (SDS) continues to emerge as a growing influence on yield.

Newer seed treatment technologies are aimed at these challenges and more. Coverage in this space can include plant parasitic nematodes, SDS, red crown rot, and Fusarium seedling blight, plus suppression of frogeye leaf spot. The result can be a cleaner canopy at the R1 to R3 foliar fungicide application, with early protection from the seed treatment followed by season-long protection from the foliar application.

Comparing Seed Treatment ROI to Other Decisions

One reference point for on-farm decisions is adopting the newest elite genetics. Those lines yield somewhere in the neighborhood of a half bushel more per acre each year, so growers adopt the latest, highest yielding genetics. They typically do it on 20 to 30% of a farm’s acres, not across the whole farm. The ROI is about 3 to 1, with a dollar invested returning $3.

Upgrading from an economical seed treatment to a comprehensive one with more protection for longer can nearly double that. The return is often in the range of $5 to $6 per dollar invested. These are estimates, and growers should run their own figures with current commodity prices.

What the 2026 Season Is Showing

This section reflects conditions in the fall of 2026.

Fusarium crown rot has been widespread across large regions this fall, in some places approaching epidemic levels, and it is the most seen since about 2018 or 2019. Affected stalks hollow out like a soda straw, standability is lost, and any wind starts bringing fields down. Driving across the Midwest, a lot of lodging is visible this year, which makes timely harvest important.

Soybean seed quality is also expected to be variable this year. Seed can carry pathogens along with it, which makes protection on the seed especially relevant.

A Strong Start, Whatever the Environment

There often isn’t enough time to go back and replant. Farms are getting larger and time constraints are growing. Seed treatments help establish the genetic potential of selected hybrids and varieties and give the season a good beginning. No one knows what 2027 will bring. Growers can use that uncertainty as a reason to research their options and look under the hood at what is on the seed.

Listen to the Podcast

This topic comes from the second episode in the Rob-See-Co Field Ready Podcast series on ROI, which focuses on the decisions that help get more from every acre. Host and CTO Dr. Ben Ford welcomes Dr. Dale Ireland of Syngenta Seed Care to discuss how seed treatments fit into the ROI conversation for corn and soybeans.

Watch the episode on YouTube or search for the Rob-See-Co Field Ready Podcast on your preferred podcast platform. A new episode airs on the first of every month.

Ben Ford

Chief Technology Officer

Next
Next

Return on Investment for Growers: Why the Cheapest Seed Bag Can Cost the Most